Ultraterm (UV) HA

Ultraterm (UV) HA

Ultraterm (UV) HA

Combined UV / HotAir dryers Ultraterm (UV)HA

Combined UV/HotAir dryer for drying and curing of UV based inks and for safety drying of solvent based inks printed on the different kinds of materials. Dryer consists from loading section, HotAir section with undepended temperature regulation and unloading section with belt drive. There is the UV bridge for UV inks curing installed on the loading section. The unloading section is prolongated and prepared for later simple instalation of the cooling section, if it will be required.

The design of reflecting mirrors from the special material with high reflectivity for UV range as well as the design of the UV source gives very high uniformity of UV energy with low temperature influence to the printed materials. The UV curing chamber of UV bridge is equipped with one row of UV lamps. Each UV lamp could be switch on separately and each UV lamp can be operated in two power steps under the base of technological requirements. The whole temperature influence to the printed material is eliminated with temperature filters The controlling panel of the UV chamber is equipped in standard with ampermeters for checking of working UV lamps point and with working hours counters for checking of the UV lamps lifetime (recommended changing after 1000 working hours).

The equipment used the high-speed high-turbulence flowing in the HotAir section - this fact allowes the minimalization of the mechanical dimensions and energy requirements of the whole equipment. Very high level of accuracy in adjustment and keeping of the pre-set temperature is guaranteed by the most modern type of temperature regulation with automatic tuning of control parameters. Control system used is characterised by very fast and exact rise to the pre-set temperature without temperature over-oscillation and by very precise keeping of the pre-set temperature.

The dryer conveyor is equipped with belt made from the fibreglass fabric, PTFE covered, with high mechanical and temperature resistance. The belt drive is through the threephase careless electromotor controlled with the frequency invertor. The speed of the belt can be read on the display of the controlling panel. The cured material is aerodynamicaly fixed on the belt. Perfect ozone exhausting. Special shields for safety operation. The controlling box with safety central STOP button and main switch of the equipment. . The perfect noise insulation, top function, simple operation, modern design. There is including the exhausting and cooling noise insulatied fan for installed UV bridge. The dryers design and operation agrees with all needed regulations of Europe Union countries and the equipment has CE declaration. The equipment is confirm by certificated authority from the point of view of safety drying of flammable materials

Parameters ULT (UV)HA 770/50 ULT (UV)HA 1100/67 ULT (UV)HA 1500/56

belt width [mm] 770 1 100 1 500

irradiated width [mm] 740 1 040 1 450

dryer length [mm] 5 500 6 700 5 600

dryer width [mm] 1 399 1 700 2 200

dryer height [mm] 1 300

HotAir section length [mm] 2 500

belt speed [m/min] 2,5-15 2,5-15 2,5-15

max. capacity 650 ks B1/hod 950 ks B1/hod 500 ks B0/hod

UV lamp linear power [W/cm] 60/120

total installed power [kW] 19 26 46

elektric supply 3 N PE 400 V

The mechanical dimensions could be changed under your request !Ultraterm ()HA

HotAir dryer for safety drying of solvent based inks printed on the different kinds of materials. Dryer consists from loading section, HotAir section with undepended temperature regulation and unloading section with belt drive. The UV bridge for UV inks curing could be very simply installed on the loading section in future due to the modular construction of whole equipment. Also the unloading section could be very simply prolongated and supplied with cooling section, if it will be required.

The equipment used the high-speed high-turbulence flowing in the HotAir section - this fact allowes the minimalization of the mechanical dimensions and energy requirements of the whole equipment. Very high level of accuracy in adjustment and keeping of the pre-set temperature is guaranteed by the most modern type of temperature regulation with automatic tuning of control parameters. Control system used is characterised by very fast and exact rise to the pre-set temperature without temperature over-oscillation and by very precise keeping of the pre-set temperature.

The dryer conveyor is equipped with belt made from the fibreglass fabric, PTFE covered, with high mechanical and temperature resistance. The belt drive is through the threephase careless electromotor controlled with the frequency invertor. The speed of the belt can be read on the display of the controlling panel. The cured material is aerodynamicaly fixed on the belt. Perfect fumes exhausting. Special shields for safety operation. The controlling box with safety central STOP button and main switch of the equipment. The perfect noise insulation, top function, simple operation, modern design. The dryers design and operation agrees with all needed regulations of Europe Union countries and the equipment has CE declaration. The equipment is confirm by certificated authority from the point of view of safety drying of flammable materials.

Parameters ULT ()HA 770/44 ULT ()HA 1100/44 ULT ()HA 1500/44

belt width [mm] 770 1 100 1 500

dryer length [mm] 4 400

dryer width [mm] 1 300 1 700 2 200

dryer height [min] 1 300

HotAir section length [mm] 2 500

belt speed [m/min] 2,5-15

max. capacity 650 ks B1/hod 950 ks B1/hod 500 ks B0/hod

installed power [kW] 10,2 15 26,7

elektric supply [V] 3 N PE 400 V

The mechanical dimensions could be changed under your request !

 
 

If you have any questions, please contact us

Name:

E-mail:

Phone number:

What is the result of 2+3?

Your question: